Features

  • E.O.L. (End of Life) as of 1/30/19
  • Replaced by SS-2U40ES
  • TEMPERATURE RANGE: Operation 0˚C~50˚C
  • HOLD UP TIME: 16ms at maximum load & normal input voltage
  • EFFICIENCY: 68% TYPICAL(Normal Line)
  • ATX 12V / EPS 12V

2U Power Supply 400W TC-2U40 Product Description

The 2U Power Supply 400W TC-2U40 is the perfect upgrade or replacement for powering an AMD or Intel based server. Ideal for 2U or 3U server cases, the TC-2U40 400W 2U Power Supply provides your system with a protection against over load, over voltage and over current situations – the perfect solution for delivering stable power to the most demanding devices.

INPUT SPECIFICATIONS
Input voltage: 90~132 or 185~260V, (115/230 auto)
Input frequency: 50 to 60 Hz.
Inrush current: 60A/80A MAX FOR 115/230
Input current: 8A/4A For 115/230VAC

GENERAL SPECIFICATIONS
Hold-up time: 17ms at 115Vac/60Hz, 17ms at 230Vac/50Hz.
Efficiency: 68% TYPICAL(Normal Line)
MTBF: 100,000 hours
Power good signal: 100ms to 500 ms

ENVIRONMENTAL SPECIFICATIONS
Operating temperature: 0˚C to +40˚C
Storage temperature: -20˚C to +80˚C
Relative humidity: 5% to 95% RH non-condensing

> POWER GOOD SIGNAL: Should be asserted high to indicate that+5VDC and +3.3VDC
output are above the low voltage thresholds. Compatible signal out with 100ms to 500ms.
> OVER POWER PROTECTION: The Power Supply shall shout down output power exceeds 130% to 160%
> OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.25VDC ± 0.75VDC
> SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and
the output shall cause no damage and the Power Supply shall shutdown.
> EMI: FCC part 15, subpart B, Class B, EN55022 CISPR22 Class B.
> AGENCY APPROVALS: UL60950, CAN/CSA22.2 No.60950, TUV(IEC60950)
> MTBF OF Power Supply ELECTRONNIS: 100,000 hours. Life expctancy of fan 40,000 hours
> COOLING: By forced air 2x60mm Fan
> DIMENSION: D200 X W100 X H70mm

DC Outputs

OUTPUT
VOLTAGE
OUTPUT CURRENT
REGULATION
OUTPUT
MIN(A)
MAX(A)
LOAD
LINE
RIPPLE & NOISE
MAX.[P-P]
+5V 3 40 ±5% ±1% 50mV
+12V 2 20 ±5% ±1%
120mV
-5V 0.1 0.3 ±10% ±1% 150mV
-12V 0.1 0.8 ±10% ±1% 150mV
+3.3V 1 20 ±5% ±1% 50mV
+5VSB 0.1 2 ±5% ±1% 50mV

 

The combined output power +5V&+3.3V shall not exceed 200W.
The total power shall not exceed 400W.

20 + 4 pin
P4 MB
peripheral
FDD
8-Pin
20+4 Pin P4 MB Peripheral FDD 8-Pin
X 1 X 1 X 5 X 1 X 1