TC-900PL PS2 900W Power Supply

FEATURES

Active PFC
Universal AC input
ATX 12V/ EPS 12V
MTBF = 100,000 hours

Specifications
Download

TC-900PL PS2 900W Power Supply Product Description

TC-900PL PS2 900W power solutions are industrial graded ATX switching power supplies from 350W to 1000W and are designed to fit perfectly into your tower case, server case, and 4U compact rackmount chassis. This series features thermal fan speed control, Active PFC, and triple circuit protection. The state-of-the-art power design with cutting edge Japanese capacitors and solid-state capacitors make our PS/2 series the ideal solution for your home or enterprise PCs, IPCs, servers, workstations, and storage systems.

AC Input

Input voltage: 100～240V, (Active PFC, Full Range)
Input frequency: 50 to 60 Hz
Input current: 11A
Inrush current: 65A/125A MAX FOR 115/230

General Specifications

Hold-up time: 16ms at maximum load & normal input voltage
Efficiency: 70％ TYPICAL(Normal Line)
MTBF: 100,000 hours

Environmental Specifications

Operating temperature: 0˚C to +50˚C
Storage temperature: -20˚C to +80˚C
Relative humidity: 95% non-condensing

Others

DIMENSION: L220 X W150 X H86 mm
COOLING: By forced air 2x80mm Fan
ATX 12V / EPS 12V
POWER GOOD SIGNAL: Should be asserted high to indicate that+5VDC and +3.3VDC output are above the low voltage thresholds. Compatible signal out with 100ms to 500ms.
OVER POWER PROTECTION: The power supply shall shout down output power  exceeds 130％ to 160％
OVER VOLTAGE PROTECTION: Standard on +5.0V, set at 6.25VDC ± 0.75VDC
SHORT CIRCUIT PROTECTION: A short circuit placed between the DC return and the output shall cause no damage and the power supply shall shutdown.
EMI: FCC part 15, subpart B, Class B, EN55022 CISPR22 Class B.
AGENCY APPROVALS: UL60950, CAN/CSA22.2 No.60950, TUV(IEC60950)
MEET EN-61000-3-2 CLASS D (ACTIVE PFC)
REMOTE ON/OFF CONTROL: When PS-ON is pulled to TTL Low, the DC output is to be enabled, When PS-OFF is pulled to TTL high, the DC output is to disabled

AC Output

OUTPUT VOLTAGE	OUTPUT CURRENT		REGULATION		OUTPUT
OUTPUT VOLTAGE	MIN(A)	MAX(A)	LOAD	LINE	RIPPLE & NOISE MAX.[P-P]
+5V	0.2	30	±5%	±1%	60mV
+12V1	2	16	±5%	±1%	120mV
+12V2	0	16	±5%	±1%	120mV
+12V3	0	16	±5%	±1%	120mV
+12V4	0	16	±5%	±1%	120mV
-5V	0	0.8	±10%	±1%	120mV
-12V	0	1	±10%	±1%	120mV
+3.3V	0.5	30	±5%	±1%	60mV
+5VSB	0	3	±5%	±1%	60mV

The combined output power +5V&+3.3V shall not exceed 64A.
The combined output power +5V & +12V & +3.3V maximum output 880W.
The total power shall not exceed 900W.